Volta Sands Sand & Aggregates · a GKM Legacy Holdings company Menu

Open for loading 24 hours, 7 days · Volivo, Lower VoltaOpen 24/7 · Volivo, Lower Volta

Volta Sands Sand & Aggregates Close the menu
Request a quote Request a call back
The Volta Lab · specimen sheet 01

What makes sand
worth buying.

We say plainly that this is the highest-quality river sand on the Volta Lake. This page explains exactly what that means, why it matters to your structure, and how to check it yourself — including on sand that is not ours.

Salt
Zero — river-dredged, non-marine
Silt
Low — demonstrable on site in an hour
Texture
Gritty, well-graded
Colour
Pale whitish-tan, never red
Refining
Sieved to grade; to any envelope on request
A cupped hand holding pale, gritty river sand, grains falling through the fingers

Sand is the least examined material on most Ghanaian sites, and the one with the longest memory. Cement is bought by brand and tested by the bag. Steel is bought by grade and stamped. Sand is bought by the trip, from whoever answered the phone.

That is how bad sand gets into good buildings. Not through a decision — through the absence of one. The failures it produces do not appear at the pour. They appear in year four as a hairline map across the plaster, in year seven as a rust stain bleeding through a column, in year ten as a structural assessment nobody budgeted for.

The salt problem

Sea sand and lagoon sand are cheap, close to the cities, and quietly ruinous. They carry chloride, and chloride attacks the steel inside your concrete — not the concrete itself. 01 Reinforcement sits in an alkaline environment that forms a protective film around it. Chloride dissolves that film. The steel corrodes, and corroding steel occupies more space than clean steel, so it splits the concrete outwards from the inside. 02

Ours is dredged from the bed of the Volta, upstream of the sea. No sea, no lagoon, no marine salt to wash out — it is non-salty, and we have tested it. Where your specification sets a chloride limit, test a sample against that limit. We will give you one.

The mud problem

Pit sand is usually heavy with silt and clay, and silt is not simply dirt to be tolerated. It coats each grain, so when cement paste goes looking for the sand to bond to, it bonds to the coating instead. 03 The mix cures to less than it was designed for, plaster crazes as it dries, and the blocks that come out of it break more often on the pallet.

You can measure this yourself in an hour with an empty water bottle. The test is below, and we would rather you ran it on our sand than took our word for it.

Shape, grading and the cement you don't buy

Two sands with identical cleanliness can still behave differently, because shape and size distribution decide how tightly the grains pack. 04 A well-graded sand has a spread of sizes, so the small grains fill the gaps between the large ones. Less void means less cement paste needed to fill it.

Ours is gritty and well-graded — the sand this argument is about. 05 For a block factory running tens of thousands of units a month, better packing and fewer rejects is not a quality argument — it is a cement invoice.

Colour is your first test

Real river sand is pale — whitish-grey to light tan. If the "river sand" on your site is distinctly red or orange, it is almost certainly iron-oxide pit sand wearing the name. You can make that judgement from the cab of a truck before it tips.

Specimen comparison

Drag the line.

Left: Volivo river sand, sieved — low silt, pale and gritty. Right: a typical silty pit sand. An illustrative comparison of the two materials, not a test result: for a reading, run the bottle test below.

Field test · no laboratory needed

The bottle test.

  1. 01

    Fill a clear bottle about one-third with the sand you are being sold.

  2. 02

    Top up with water, cap it, and shake hard for a full minute.

  3. 03

    Stand it somewhere level for an hour. Sand settles first; silt and clay settle above it as a distinct darker band.

  4. 04

    Measure both layers. Silt as a percentage of the total settled column is your field reading.

An illustrative field heuristic, not an acceptance limit: below 8% reads as low silt, 8% or more as high. Either way, a laboratory sieve test against your project's specification is what confirms it.

Run it in the silt calculator →
Settled · 60 minutes
The invitation

Don't take our word. Test it.

We will hand you a sample to take away, free, and we would rather you tested it than believed us. Grading, silt, chloride, organics — put it through whatever your specification demands.

For ready-mix producers and QA/QC engineers this is the fastest route: test it once, and if it meets your envelope, specify it.

Certified resultsPublished as issued

Independent laboratory certificates will be published here, batch by batch and unedited, the moment they are issued. Until then the sample invitation above stands, and buyers who have already tested our sand are the reason we make the claim we make.

Volivo · Lower Volta · 6.0927° N, 0.2691° E
Specify it · Volivo 6.0927° N

Specify it, sample it, or just order it.

Whatever standard your project needs, we will get the sand to it — and hand you the material to prove it.

Open for loading · 24 / 7 Every tipper served LPOs accepted